CBAM software · for producers outside the EU and EU importers
Don’t overpay on CBAM.Prove your actual costs.
Model your installation once — routes, precursors, electricity — and DeCarbonPro prices every good you ship two ways: on the EU default value, and on your own proven emissions. Then it generates the operator’s emissions report you put to an accredited verifier, and the summary your buyer receives — every figure citing the act behind it.
✕Scattered spreadsheetsThe figures sit across workbooks nobody owns, in versions nobody can date.
✕Suppliers chased by emailEvery reporting period starts with the same chain of reminders.
✕Rebuilt by hand each periodThe same work, done again, and never quite the same way twice.
✕No figure anyone can defendNothing on the sheet names the act it came from.
↓
AfterSample data, captured in the product — Analyze › Overview.
Features
What you get
four things, all in the one plan. Nothing is an add-on and nothing is metered.
Build your installation as a flowsheet
Draw the routes, precursors, fuels and electricity on one canvas. Connect them once and every good you ship prices off it.
Upload a filled EU Communication or EFDA workbook and the flowsheet is built from it
Sample data — Manage › Installations.
Calculate embedded emissions to the regulation
Direct and indirect embedded emissions, computed the way the implementing act sets out. Every figure names the article behind it.
Published default values with the mark-up applied, and your own actual figures beside them
Calculation: IR (EU) 2025/2547 · default values and mark-up: IR (EU) 2026/1740, Annex I
Sample data — Analytics › Overview.
Produce the emissions reports
The operator's emissions report an accredited verifier checks, and the summary your EU buyer receives — as often as you need.
Unlimited reports, every reporting period, no per-report charge
The Operator's Emissions Report — IR (EU) 2025/2547, Annex IV
With DeCarbonPro
Operator’s Emissions Report — generated
Direct SEE2.00694 tCO₂e/t
Indirect SEE0.4066 tCO₂e/t
The mark-up on default values, by year — IR (EU) 2026/1740 Annex I
10%2026
20%2027
30%2028+
Example: our engine’s output on the Commission’s published Steel-3 workbook.
Sample data — Manage › Reports.
Share a supplier portal with your EU buyers
One controlled link to your emissions data instead of emailed spreadsheets — password-protectable, and you can withdraw it.
Shows the figures and the acts behind them, not your raw workbook
What the figures rest on
The acts behind every figure
Every figure here resolves to a published instrument. This is the whole shelf, and the day each act was last checked.
2023/1773
2023/956
2024/3210
2025/2083
2025/2210
2025/2546
2025/2547
2025/2548
2025/2549
2025/2550
2025/2551
2025/2619
2025/2620
2025/2621
2025/486
2026/1740
16 acts held · last checked against the Official Journal on 11 Aug 2026
Provenance
Where the numbers come from
Not our opinion and not a rule of thumb. Every figure resolves to a sentence in a published act. Here is one, in full.
the mark-up shall be 10 % for the year 2026, 20 % for the year 2027 and 30 % for the year 2028 and onwards
Implementing Regulation (EU) 2026/1740, Annex I — cement, iron and steel, aluminium and hydrogen.
Default values carry a mark-up — 10% in 2026 on iron and steel, aluminium, cement and hydrogen, rising to 30% by 2028. Proving your own number is what removes it.
Proving your own number is what removes it.
Who it is for
The producer proves the figure. The importer pays the bill. Both need the same record.
For producers and installation operators outside the EU
Calculate what your goods carry, and publish it to your buyer
Model the installation once and every good you ship prices off it — on the EU default value and on your own proven emissions, with the article cited on each figure.
Model your installation as a flowsheet — routes, precursors, fuels, electricity
Direct and indirect embedded emissions to the implementing act, each figure citing its article
The report an accredited verifier checks, and the summary your EU buyer receives
21 days free first · 30-day money-back on your first payment
Free for 21 days first — one installation, reports watermarked until you subscribe. 30-day money-back on your first payment, no per-report charge, support included.
